Kyosho Mad Force Kruiser VE 1/8 ReadySet Monster Truck w/Orion Vortex Motor, R8 ESC & Syncro 2.4
This
is the Kyosho Mad Force Kruiser VE 1/8 ReadySet Monster Truck with an
included Orion Vortex Brushless Motor and R8 ESC. Drivers will be blown
away by the explosive acceleration as soon as the throttle trigger is
pulled on this intimidating monster truck! The extraordinary power and
performance comes from the Team Orion VORTEX brushless motor and new
Vortex R8 ESC that have been combined to deliver breathtaking power and
monster acceleration that has never seen before. With a heavy-duty
chassis and drive train to back it up, the MAD FORCE Kruiser VE
demonstrates superior durability. Also, the Readyset features a
pre-assembled chassis, so just add batteries for the chassis and
transmitter, and a battery charger and youre ready to bash with true
monster truck power and style.
What is a Ready Set? A Readyset is
a fully assembled model that includes nearly everything you need to
run. Body Color scheme is complete so only consumables like batteries
(two 7.4v LiPo, or two 7.2v NiMH) are required so you can start
operating the model without delay.
Features:
Solid Axles: Solid axles are equipped with front and rear differentials
that feature machine cut steel spiral bevel gears in a shaft drive 4WD
chassis that delivers spectacular drive power.
Longer Chassis:
30mm longer wheelbase compared to the original Mad Force and lowered
suspension adds improved straight line and high speed cornering
stability to the machine's hard charging performance characteristics.
Improved Arm Position: Optimal position of suspension arms at 1G
delivers improved maneuverability while retaining plenty of suspension
stroke. Addition of rib reinforcements increases suspension arm
rigidity.
Big Bore Oil Shocks: Features heavy duty big bore oil
shocks as standard. Takes even the harshest punishment for long periods
without complaint and provides excellent damping power.
Team
Orion Vortex 8: The Vortex 8 brushless motor and ESC combo is what
powers the Inferno VE. The Team Orion Vortex R8 ESC is equipped with a
cooling fan system that will always be on to completely prevent any
pebbles from jamming the fan. Compared to the current RTR ESCs which the
fan will only turn on when the FET temperature rises and cant engage
due to a small pebble jamming it, causing overheating. Heat protection
safe circuit, when this feature is activated (automatically) the
throttle function will shut down preventing any possible disaster. Auto
Cut Off is another features on the Vortex R8 ESC, in case of a overload,
the ESC will automatically cut off and protect the entire system. Auto
battery detection, on/off switch is separate from the ESC so its
replaceable if the need arises and also a dust switch cover as standard
equipment.
Hot-Rod Kruiser Body: Features new hot-rod truck body
design. Pre-painted so you can enjoy the action in true truck style
without delay.
Chain Drive: Shaft and chain 4WD mechanism realizes highly efficient power transfer.
Heavy Duty Chassis: Includes heavy duty black anodized chassis side plates that are 30mm longer than standard Mad Force.
New Knuckle Design: New knuckle design increases control angles. This
will give you a smaller turning radius, you can run circles around the
competition.
19mm or 14mm: Features 19mm hex hubs. Just remove the top 19mm hex to reveal a 14mm hex hub that can also be used.
Steel Diff Gears: Ultra-strong steel diff gears are used in both front
and rear diff to handle all the power being generated by the Vortex
Motor.
20 Ball Bearings: Total of 20 ball bearings used throughout the drive train for super efficient power transfer.
Interchangeable: Front - rear interchangeable suspension arms for efficient maintenance and parts utilization.
Syncro 2.4GHz: A stylish FHSS 2.4GHz rc system featuring dual rate
function are pre-installed. Also features a 4 channel receiver,
providing a side range of upgrades.
Vortex BL Motor: The Vortex 2050kv brushless motor delivers powerful driving power from low to high RPM.
Ideal Chassis Balance: Specified for 14.4V or 14.8V power from twin
NiMH or LiPo batteries. Parallel battery layout realizes ideal balance
for control stability.
High Torque Metal Gear Servo: Equipped
with a high torque metal gear KS-200 servo for the best performance
right out of the box.
Includes: Pre-Assembled Mad Force Kruiser VE Chassis
Pre-Painted Hot-Rod Kruiser Body
Team Orion VORTEX 2050Kv brushless motor
Team Orion R8 ESC
Cross Wrench
Needed to Complete: (8) AA-sized alkaline batteries for transmitter
Batteries for chassis; Either two 7.4V LiPo, or two 6/7 cell NiMH packs
Charger compatible with chosen battery chemistry
NOTE:
Batteries must be equipped with Deans, or other T-style plug. The
default setting of the ESC is set for LiPo battery mode. When using with
NiMH battery packs, the setting will need to be changed to NiMH mode
using the digital setup box (Sold separately).
