Kyosho 30052VR Mini-Z Moto Racer Ducati Desmosedici GP11 No.46
The very popular Moto GP machine has been shrunk down to a 1:18 scale
model that will fit in the palm of your hand. The Ducati Desmosedici
GP11 No.46 is now under your control, ready to battle with your friends
on Mini-Z size race tracks. Looking at the high demand for the 1/8 scale
Moto GP Bikes, and the number enthusiasts of R/C motorcycles all over
the world the Mini-Z Moto Racer was a no brainer. However, it's not easy
for beginners to get used to driving an R/C motorcycle because a
two-wheel vehicle is naturally unstable at the low speed range. The
MINI-Z Moto Racer has adopted sophisticated technologies to overcome
this problem and has lowered the hurdle while maintaining the fun of
control. Anybody can now jump into this genre and feel the fun of
two-wheel vehicle driving.
The first hobby grade R/C Micro Motorcycle at this size! The innovative
E-gyro system equipped within the rear wheel keeps the bike going
straight even running at a super slow speed while realizing quick
leaning action at a high speed. With the digital proportional system for
steering and throttle, you can control the bike as if you're riding it!
No special technique is required to drive it... If you're an
experienced R/C car driver, you?ll only need a short period of practice
to get used to it. Even if the bike falls down, no worries! The support
bars hold the bike at a certain angle and help restart it when throttle
is applied. Equipped with a high power core-less drive motor,
lightweight 3.7V 120mAh LiPo battery, and ten ball bearings the bike
accelerates up to 20km/h and realizes up to 10-minute runtime. Thanks to
the E-gyro system, the Mini-Z Moto Racer can run virtually on any
smooth on-road surfaces.
- Features:
- E-Gyro - A flywheel spinning in the rear wheel driven by a dedicated
brushless motor an E-gyro greatly increases the stability of the bike
especially at slow speeds. The spinning RPM of the E-gyro can be
configured from the transmitter independently from high and low throttle
input. The E-gyro effect (RPM) can be controlled by turning a knob on
the transmitter you can adjust for the best balance between stability
and agility while you are driving the bike.
- FHSS 2.4GHz - The new KT-19 transmitter uses the Frequency
Hopping Spectrum System, which is considered to be more resistant to
interference or lockout when the 2.4GHz frequency ban is congested. The
gyro RPM can be controlled inversely proportional to the throttle input,
so the E-gyro can spin faster when throttle is off and slower when
throttle is wide open.
- Caster Angle - You can fine tune the caster angle and adjust
the cornering characteristics of the motorcycle to match your driving
style.
- F/R Suspension - Coil springs are integrated in the front fork
and rear swing arm suspension system providing great road handling
performance.
- LiPo Charger - Included is a USB LiPo battery charger. The
charger charges a liPo battery in 20 to 60 minutes. It can either be
powered by the KT-19 transmitter or any USB power supply currently
available in the market. The KT-19 transmitter can charge LiPo batteries
3 to 5 times with a set of alkaline batteries and the charger indicates
the remaining capacity of the transmitter batteries. When using a
powerful USB power source, the charger can charge two LiPo batteries
simultaneously.
- Smooth - The Mini Z Moto is equipped with a full ball bearing
drive train, giving you the best and most efficient drive train
possible.
- More Friends - There are advantages to using the latest 2.4GHz
technology like not having to worry about frequencies, radio hits and
not being able to race with your friends. The FHSS system allows you to
run up to 40 bikes can be operated simultaneously.
- Includes:
- Factory assembled MC-01 Chassis
- Yamaha YZR-M1 body and rider are pre painted.
- FHSS 2.4GHz KT-19 Transmitter
- 3.7v 120mAh LiPo Battery
- USB Dual Charger
- USB Cable
- Tweezers - Tools
- Hex Wrench
- Launch Date: 4/27/2012
- Requires:
- Shipping: Normally ships within 1 day
- Specifications:
- Scale: 1/18
- Length: 118mm (4.6in)
- Width: 41mm (1.6in)
- Height: 73mm (2.8in)
- Wheelbase: 85mm (3.3in)
- Weight: 85g
- Motor: Brushless (KV7000)
- Transmitter: KT-19
- Top Speed: approx 12 mph.
- Runtime: approx 10 min.