Turnigy nano-tech Shorty 4200mah 2S2P 65~130C Hardcase Lipo Pack

Turnigy nano-tech Shorty 4200mah 2S2P 65~130C Hardcase Lipo Battery Pack.
"Shorty" Packs are designed to give you an extra tuning advantage when setting up your ride, while the pack shares the same width and depth as a conventional 2 cell 7.4v hardcase Lipoly battery, the length has been reduced. In a standard 1/10th scale vehicle this shorter length allows the pack to be moved forward or backward giving you a tuning option previously unheard of. Maximize your air time with a perfectly balanced Truck, Buggy or SCT using nano-tech shorty packs!

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
 
In short, less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
 
Spec.
Capacity: 4200mAh
Voltage: 2S2P / 2S Cell / 7.4V
Discharge: 65C Constant / 130C Burst
Weight: 189.9g (excluding wire & case)
Dimensions: 96x46.4x25mm
Balance Plug: JST
Discharge Plug: 4mm Bullet-connector to your own custom plug

The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
 
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.