TURNIGY 5-7.5A (8~42v) HV UBEC for Lipoly

TURNIGY 5-7.5A (8~42v) HV UBEC for Lipoly.
Power your receiver and servos with the baddest of UBEC power solutions.
The all new Turnigy 7.5A UBEC  is an advanced switching DC-DC regulator which will supply a constant 5A or more with short bursts of up to 7.5amps. The Turnigy UBEC plugs into a 3 - 10 Cell Lipoly pack and supplies a constant 5 or 6v to your receiver.
The system includes an anti-short circuit and overheat function with a thin metal shield cover, reducing noise
Also included is an Output filter to reduce noise, an on/off switch and a step down regulator adapter.
Chip efficiency is 92%.

If you have a mid sized plane, with standard servos and want a solid UBEC which wont quit. This is an excellent option.


Spec.
Output (Constant): 5v/5A or 6v/5A
Input: 8v-42v (3-10cell lipo) High Voltage
Size: 48x27x9mm
Weight: 37g
Quiescent current: 20mA
Type: Switching, however because of the noise reduction (thin metal case & filter) this unit gives the same noise as a Linear BEC.