Turnigy Marine 120A Brushless Boat ESC

Turnigy Marine 120A Brushless Boat ESC.
TURNIGY marine ESCs are built with USA IR mosFETs for long run times and less heat.
Boat escs have a different requirement to air or car escs. Their need for sustained high-amp draw makes plane escs unsuitable and car escs with large amp spike capability, unnecessary.
Thats why TURNIGY marine escs are designed purely for boats, and coated in anti-static then water resistant laquer to prevent shorting should the esc get wet. They can handle sustained high amp/volt loads and handle heat better than a car or plane esc.
What makes this ESC better than others?
-Well designed MCU, with efficient code makes for faster sync and accurate timing.
-Fast clock cycle MCU combined with efficient code means 100,000rpm cpu cycle*
-Efficient FETs reduce heat and deliver sustained switching at high amp/voltage.
-Well designed PCB (6 layer) and circuit diagram handles high-amp without burnout.
-Large motor comptability. Smooth starts, linear throttle curve.
-Active water cooled heatsink that actually works.

Programmable settings
Reverse
Low Voltage (none/2.8v/3v/3.2v/3.4v)
Brake: (none/soft/hard)
Timing (0.00/3.75/7.50/11.25/15.00/18.75/22.50/26.25)

Constant Current: 120A
Burst Current: 240A
Resistance: .0007ohm
Battery: 2-6S Lipoly
BEC: 3A/6v
Motor Type: Sensorless Brushless
Size: 94 x 33 x 18mm
Weight: 91g
*Speed: 100,000+rpm(2 Pole)