Turnigy nano-tech 2200mah 3S 25~50C Lipo Pack .
More than just a fancy name. TURNIGY
nano-tech lithium polymer batteries are built with an LiCo
nano-technology substrate complex greatly improving power transfer
making the oxidation/reduction reaction more efficient, this helps
electrons pass more freely from anode to cathode with less internal
impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For
those that love graphs, it means a straighter, longer curve. For pilots
it spells stronger throttle punches and unreal straight-up performance.
Excellent news for 3D pilots!
Spec.
Capacity: 2200mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 25C Constant / 50C Burst
Weight: 187g (including wire, plug & case)
Dimensions: 106x35x24mm
Balance Plug: JST-XH
Discharge Plug: XT60
Suited to the following models: ALIGN T-REX450, E-flite Blade 450 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE.
* The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1)
The nanometer conductive additives form ultrastrong electron-conducting
networks in the electrodes which can increase electronic conductivity.
2)
These additives create a superstrong ability for imbibition in the
carrier liquid to supply more ion channels. This improves the ability of
ion transmission and ion diffusion.
Through improving electronic
conductivity and ion transmission, the impedance is reduced and the
polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries;
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly .
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology.
