Watt Meter & Power Analyzer /Watts up (Ver. 2)
The new "Watts Up" RC battery Watt meter from RC Electronics measures
and calculates all the electrical parameters you need to get high
performance from your R/C cars or planes. It is an essential tool for
increasing the performance and safety of your electric-powered R/C
model. With the best balance of specifications and features on the
market, you can stop guessing and start knowing "Watts Up" with your
performance!
Why do I need a watt meter? The "Watts Up" watt meter helps you:
* Predict model airplane flight time
* Ensure peak currents are safe for motor, wiring and connectors
* Check battery health and whether battery should be retired
* Evaluate R/C battery charging efficiency
* Verify that the minimum voltage while operating is within specifications
* Choose the best propeller or gearing and the most efficient motor
* Check for wiring and connector power losses
* Measure power and energy consumption of ANY device with a battery
Measures energy (Wh), charge (Ah), power (W), current (A) and voltage (V)
Connector to use a receiver battery for measurement down to 0 V
Captures current peaks and voltage minimums(droops)
Accurate & precise - 0.01 A current and 0.01 V voltage resolutions
Rugged - handles 50 A continuous and 100 A peak at 60 V
14 ga., 7 x 37 stranded, high temp silicone rubber insulated wire without connectors
Small & Light: 2.8" long x 1.7" wide x 0.83" thick (70 mm x 44 mm x 21 mm), 2.5 oz.
Acts like a wire so doesnt affect models performance. Precision current
sensing resistor, with only 0.001 Ohm resistance and circuitry only
draws 0.007 Amps
Uses DSP to increase ADC resolution and differential measurement amplifiers to increase noise immunity
Factory calibration stores constants in EEPROM to compensate for component tolerances
No PC necissary.
One Year Warranty
Complete User Manual
Made in USA to ISO 9001 standards