HOBBYWING EZRUN MAX8 T-PLUG & EZRUN 4274SL SENSORLESS MOTOR COMBO.
The MAX8 ESC provides the optimal upgrade solution for many popular
1/8th scale monster trucks like TRAXXAS E-REVO & E-MAXX, HPI SAVAGE,
and THUNDER TIGER E-MAT. ItΆs also applicable to other trucks and
buggies. The whole ESC except the cooling fan is basically maintenance
free. Besides, the fan has also adopted the special anti-shock design,
reduced damage brought by frequent jumps of the vehicle, greatly reduced
maintenance work to the fan.
Reliable hardware combined with
advanced software allows the ESC to not only provide extremely high
output but also protect itself timely from damages caused by overload.
It significantly reduces the possibility of getting damaged by heavy
load and improves the reliability and durability.
The ESC has
strong outbreak and stable output, so vehicle can do different moves
without a problem, no matter aggressive start-up and wheelie, 720-degree
flip (note 1), high speed running on straight tracks or flying over
slopes. It always provide the power more than sufficient. Besides,
driver can adjust relevant parameters for smooth and soft start-up.
The
worldΆs 1st 1/8th scale ESC adopted the super built-in BEC with the
max. output current of up to 15A and switchable output voltage
(6V/7.4V). It can drive different servos, high voltage servos at ease
and bring amazing control feel to drivers. The electronic switch with
the lifespan of over 50000 times of switching on & off features a
completely waterproof, dust-proof and shock-resistant design, completely
solved problems like stuck reed and rust contact points caused by dust
and moisture, switching off automatically caused by violent dash (like
landing after flying over slopes) conventional mechanical switches often
have.
Outstanding waterproof and dust-proof capability makes the
MAX8 applicable to all weather conditions, no matter the track is
covered with dust, gravel, snow or puddles.
HobbyWing EzRun MAX8 V3 Features:
- High Reliability & Durability
- Great Flexibility & Versatility
- Advanced and Secure Electronic Switch
- Applicable to All Weather Conditions
- Super Built-in BEC
- Plug and Play
- Almost Maintenance Free
ESC Spec Check:
- Scale: 1/8th
- Brushed/Brushless:BL
- Sensored/Sensorless: SL
- Waterproof: Yes
- Cont./Peak Current: 150A/950A
- Input: 3-6S LiPo/9-18 Cells NiMH
- BEC Output: Switch Mode:6V/7.4V,6A
- Input Wires: Red-10AWG-200mm*1/Red-10AWG-150mm*1/Black-10AWG-150mm*1
- Output Wires: Black-10AWG-200mm*3
- Input Connectors: T Plug/Traxxas Plug
- Output Connecotors: 6.5mm Famale Gold Connectors (pre-soldered onto the PCB)
- Fan Size: 30.0x30.0x10.0mm
- Fan Voltage Range: 5-7.4V
- WiFi Module: Supported
- Program Port: FAN/Program Port
- Size: 59.8x48.0x36.8mm
- Weight: 174g
The 4 pole design of the EzRun 4274 will guarantee the motor to
produce very large amounts of torque, a much faster acceleration
response and a very stable output of power to the drivetrain.
HobbywingΆs
temperature control technology has been designed to protect the motor
from being damaged by heat thus less heat more efficient the motor will
run and perform. The output performance of this motor has an efficiency
rate of up to 90% meaning that if the energy consumption of the motor is
at 1000 watts your guaranteed that 900 watt of that power will be
available and no less
The motor housing is made from hard
anodized aluminum, motor windings are wound from pure oxygen-free double
insulated copper wire, the advanced rotor structure is designed to
handle high temperature from the use of rare earth magnets, output shaft
from high quality polished alloy steel and the imported bearings which
are implemented are high precision metal caged for a minimum to zero
friction which in turn will guarantee strength, outstanding performance,
high durability and smoothness of the motor.
This motor can also
provide a powerful upgrade solution for all popular 1/8th scale monster
trucks such as TRAXXAS E-REVO, E-MAXX, HPI SAVAGE, and THUNDER TIGER
E-MAT plus other trucks and buggies.
HobbyWing EzRun 4274SL G2 Features:
- High Torque
- High Efficiency
- Solid Construction
- Quality Materials & Excellent Design
Spec Check:
- Scale: 1/8th
- Brushed/Brushless: BL
- Sensored/Sensorless: SL
- Pole Count: 4
- KV Rating: 2200
- LiPo Cells: 2-6S
- No-load Current(A): 5
- O.D.(mm): 42.0
- Length (mm): 74.0
- Shaft Diameter (mm): 5.0
- Weight (g): 418