This almost-ready-to-fly jet is very complete, the only additional
items you need are a 6-channel transmitter, receiver, and a lithium
battery charger that can charge the included 4 cell 2200 mAh flight
battery; everything else is included.
Some easy assembly is required; you must glue the wings and tail onto
the fuselage and install the control horns and pushrods to the
pre-installed servos. A set of retracts are included. The main gear
must be screwed into the wings and connected to the pre-installed
retract servos. The steerable/retractable nose gear is pre-installed.
The airplane includes 8 pre-installed servos, a 70mm ducted fan unit
with outrunner brushless motor, a 40A speed control, a 4 cell 2200 mAh
lipoly battery pack, retractable landing gear and assorted hardware.
Assembly takes only a couple of hours.
This jet has plenty of power to take off from a smooth surface or
runway. The speed range is moderate with very good manners. Difficult
to stall, the jet will slow to a crawl and still maintain full control.
Great to land, the approach is easy to control and smooth landings are
easy to do. For 6 channels: Ailerons (2 servos), Elevator, Rudder, Nose
wheel steering, Retracts (3 servos) and Throttle.
Spec Check:
- Length: 1300mm
- Wing Span: 775mm
- Ready-to-fly weight: 950g
- Wing Area: 12.44dm
- Wing Load: 72.3g/dm2