HOBAO HYPER MT VIDEO - ΔΕΝ ΜΑΣΑΕΙ
Underneath the body, the Hyper MT features a convenient carry
handle/roll bar to protect the brushless motor and speed control from
damage. The trucks centre line is neatly balanced with the
longitudinally mounted motor esc, sandwiched between twin side battery
boxes for better handling and control. The main aluminium ladder/truss
chassis carries a centre gearbox with gear reduction system. All
transmission, differential and pinion gears are hard anodized steel for
maximum durability.
High quality Savöx digital metal-geared SC0252 10.kg servo handles the
steering, while a waterproof Hobbywing 150A speed control and 2000kv
sensorless brushless motor provides the power and control. Just couple
up your choice of twin NiMH (up to 16 cells) or LiPo (either 2S or 3S
type) battery for some insane speed runs.
The 2.4ghz receiver is protected with the centre radio box for added
security, with space for a separate receiver pack if you wish to use for
high-powered aftermarket servos.
Super stroke high volume oil filled aluminium shock absorbers soak up
the terrain via the robustly designed symmetrical front and rear
suspension arms, uprights, hub carriers and steering blocks. Adjustable
left/right threaded steel turnbuckles provide fine simple suspension
geometry adjustment for optimum performance.
If you like your models big and fast, then the Hyper MT brushless ticks all the boxes and some!
Hyper MT Sport Features:
- 99% Ready-To-Run
- HoBao 2.4ghz 3 Channel radio system
- Hobbywing 150A brushless speed control
- 2000kv Sensorless brushless motor
- Savox SC0252 10.5kg steering servo
- Heavy duty steel differential, pinion and transmission gears
- Low profile big lug tyres
- Low profile Giga star 17mm hex wheels
- Centre roll bar/handle
- Super stroke large volume oil filled shock absorbers
- Full aluminium truss chassis
- Large capacity receiver and battery box
- Enclosed gear reduction transfer case
- Clamp style motor mount for zero flex
- Side truss moulded battery holders with Velcro straps
- Adjustable stainless steel turnbuckles
- Symmetrical front and rear suspension arms, carriers and steering knuckles
- Aluminium hinge pin holders
- Rubber sealed ball bearings
- Moulded front and rear bumpers & skid plates
- Front ΅GemΆ bumper headlights
- Pre-painted custom styled bodyshell and accessories
Spec Check:
- Length: 559mm
- Width: 432mm
- Height: 254mm
- Weight: 4852g
Please Note: This kit requires a Wheel
Wrench, Lipo Batteries and AA batteries for completion. (** NB:the
battery packs required for the truck are two NiMH (up to 8-cell ΅flatΆ
type packs) or two LiPo batteries (2S or 3S) plus applicable charger.
Batteries must be same type, voltage and capacity.**)
HoBao are renowned for their excellent build quality, strong designs and
value for money, and the Hyper MT is no exception. Featuring some
modern styling to that old and dated Monster Truck look, the Hyper MT
uses an aggres¬sive cab forward style bodyshell with side rails,
oversized 12cm diameter low profile spoked wheels that are married up to
some high traction low profile block directional pattern tyres for the
ultimate in handling and power transfer.
Underneath the body, the Hyper MT features a convenient carry
handle/roll bar to protect the big block Hyper 30 6-port pull-start
engine. The trucks centre line is balanced with a high capacity offset
fuel tank, longitudinally mounted engine and polished aluminium tuned
pipe for better handling and control. The main aluminium ladder/truss
chassis carries a centre gearbox with internal 2-speed transmission and
gear reduction system. All transmission, differential and pinion gears
are hard anodized metal for maximum durability.
High quality Savöx servos in the form of the digital metal geared SC0252
10.5kg on the steering and SC0254 7.2kg on throttle control the Hyper
MT, while the centre radio box protects and houses the switch, receiver
and radio battery pack.
Super stroke high volume oil filled aluminium shock absorbers soak up
the terrain via the robustly designed symmetrical front and rear
suspension arms, uprights, hub carriers and steering blocks. Adjustable
left/right threaded steel turnbuckles provide fine simple suspension
geometry adjustment for optimum performance.
All in all this is one hell of a monster ready to be unleashed by you on some unsuspecting local wasteland!
Hyper MT Sport Features:
- 99% Ready-To-Run*
- HoBao 2.4ghz 3 Channel radio system
- HoBao 30 6-port pull start engine
- Polished In-line connected aluminium tuned pipe
- Dual stage air filter
- Savox SC0252 10.5kg and SC0254 7.2kg servos
- 2-Speed transmission
- Heavy duty steel differential, pinion and transmission gears
- Low profile big lug tyres
- Low profile Giga star 17mm hex wheels
- Centre roll bar/handle
- Super stroke large volume oil filled shock absorbers
- Full aluminium truss chassis
- Large capacity receiver and battery box
- Enclosed gear reduction transfer case
- Non-slider engine mount
- 3-shoe clutch system & 14 tooth clutch bell
- Adjustable stainless steel turnbuckles
- Symmetrical front and rear suspension arms, carriers and steering knuckles
- Aluminium hinge pin holders
- Rubber sealed ball bearings
- Monster capacity fuel tank
- Moulded front and rear bumpers & skid plates
- Front ΅GemΆ bumper headlights
- Pre-painted custom styled bodyshell and accessories
Spec Check:
- Length: 559mm
- Width: 432mm
- Height: 254mm
- Weight: 4763g
*Please Note: This model requires RC
Fuel, Fuel Bottle, Glow Ignitor, Glowplug Wrench, Wheel Wrench, Receiver
Battery & AA Batteries for completion. (For the very best
performance HoBao strongly recommend the use of a 6V rechargeable
receiver battery rather than low cost AA Alkaline)