ENERG PRO B-45 SBEC ESC (45A) (2-6 CELLS).
Specification
- Output :Continuous Current 45A, Burst Current 65A for 10 seconds
- Battery Cell :5-18NC/2-6Lipo
- Weight :58g
- BEC Output :5V/5A
- Size :30x56x11mm(LxWxH)
Features:
- Supports high RPM motors,can be used with most of the motors in the rc market
- Secondary sub-menu setting ,is easier to be programmed
- Adjustable BEC output 5.0V/5.5V/6.0V and Continuous 5A current (supplies the Servo with much stronger power)
- Advanced Governor Mode ( has the B-Series ESC to keep the motor speed even though the load is changed)
- More optional motor timing Setup and soft acceleration start ups ( make the motors run smoothly)
- Super smooth and accurate throttle linearity
- Power arming protection (prevents the motor from accidentally running when switched ON)
- Auto throttle shut down in signal lose situation
- Safety thermal over-load protection, when the temperature of ESC
exceeds 110 deg C,the ESC will reduce the output power to allow it to
cool
- Use new generation of the MOSFET to ensure ESC's heating low,supporting biggest Peak current and higher reliability
- New Advanced programming software
- EnErG Pro B-45 BEC
- Continuous - 45A (Burst - 65A)
- Weight - 58g
- Size - 30x56x11mm
- Lipo Cells - 2-6 (NiMH Cells - 5-18)
- BEC Output - 5.0-5.5 or 6.0v (ADJUSTABLE) At 5A
- Programmable - Yes (Manually or by Program card not included)
- Program Card - 4404970
