TQ'ing all four rounds of qualifying, Team Associated's RC8T Factory
Team kit took first place at the 2009 ROAR Nationals! Driven by Ryan
Maifield and powered by the Reedy 121VR .21 competition engine, the RC8T
performed as it was designed to and brought home the big win!
Inspired by this achievement, Associated is proud to introduce the RC8T
Factory Team Championship Edition Kit. The RC8T CE kit has added many
new features to the original RC8T that make it an even more potent race
machine. Improved strength, durability, rough track handling and overall
performance are all qualities built into the RC8T CE making it the most
competitive Team Associated truggy to date.
RC8T Factory Team Championship Edition
Features
- Pre-assembled shocks, diffs and turnbuckles with Factory Team
shock and diff fluids included.
- Factory Team 16mm Big Bore
threaded, hard-anodized shocks feature heavy-duty 4mm TiN coated
stainless steel shock shafts for durability and reduced stiction.
- Updated
5mm 7075 blue aluminum shock towers with additional rear camber link
options.
- Revised front upper camber link assembly allows for
easier adjustments and maintenance.
- 7075 blue aluminum
suspension mounts key into chassis for maximum durability.
- Molded
bushings allow for easy adjustment of caster, rear toe-in, rear
anti-squat, and front kick-up.
- Updated steering geometry for
more consistency and reduced bump-steer.
- Molded composite radio
tray includes optional forward placement battery box for increased
corner speed.
- Molded composite front and rear chassis braces
for increased chassis response.
- Blue aluminum Narrow hex
adapters with pin retainer clips and nylon locking wheel nuts.
- JConcepts
Punisher body features a low profile design for a lower C.G., improved
air flow and quicker fueling.
- JConcepts Illuzion wing
pre-drilled for RC8T.
- JConcepts tyres and foam inserts.
- Three
aluminum clutch shoes with full sets of 1.0mm and 1.1mm clutch springs.
- Factory Team 7075 blue aluminum one-piece top plate.
- Lightweight
3mm 7075 hard-anodized chassis.
- 4.30:1 ratio gearboxes with a
14T clutch bell and 54T spur gear.
- Heatsink brake discs with
"FFC" Free Float Caliper brake system eliminates unwanted brake drag.
- Two-piece
split-center diff mount allows easy access to the center diff.
3.5mm
light CVA drivetrain with full ball bearings.
- Rear molded CVA boots to keep dirt and mud out of rear joints.
- Lightweight
engine mounts.
Spec Check
- Scale: 1:8
- Power: Nitro
- Length: 555mm
- Width:
410mm
- Wheelbase: 375mm
- Track: 346mm
- Drive: 4WD
Please Note: Kit requires •.21 or .28
Class rear exhaust engine, 2-Channel radio, Receiver, 2 x Servos,
4.8v-6.0v Receiver battery pack (RC8 will accept either 5-cell flat or
hump pack), Muffler or manifold and spring, AA-size Batteries for
transmitter, Fuel, Glow starter, Starter box &Tyres for completion.