HOBBYWING ELECTRONIC POWER SWITCH.
This Electronic Power Switch features multiple functions like battery
capacity indication, low-voltage indication, over-current protection,
short-circuit protection and thermal protection; it can control the
ON/OFF of current flow to the receiver, and it is operated by only one
button, this helped to solve problems like bad contact caused by
vibration or oxidation of contacts conventional mechanical switches
have.
The splash-waterproof design makes it applicable for all weather conditions.
Features:
- Low-voltage Indication: When the battery voltage goes below the
following threshold value for about 2 seconds, the POWER LED will blink
RED slowly.
- Thermal/Overheat Protection: When the internal temperature of the
electric switch goes above 100? (212 ?) for about 2 seconds, the
electronic power switch will enter the thermal protection mode.
- Over-current Protection: Trigger condition of the over-current
protection: The current is between 20~39Amp and that lasts for about
500ms
- Short-circuit Protection: Trigger condition of the short-circuit
protection: The current is over 40Amp and that lasts for about 500us.
- Battery Polarity Reversal Protection: It only works when no load is connected to the switch.
Spec Check:
- Battery Type: LiPo / LiFe / NiMH
- Input Voltage: 2S LiPo / 2S LiFe / 5S NiMH
- Max. Current: 12A
- Size: 26.5mm x 19.7mm x 10.5mm (L*W*H)
- Weight: 7.5g