Profi mc 4000 - Τηλεκατεύθυνση

The PROFI mc 4000 has been the showpiece of the MULTIPLEX
range of transmitters for more than ten years. The experience
which we gained with the PROFI mc 3030, a system
which has gained almost legendary status, was exploited to the
full in the development of this transmitter. Here are just a few of
its features:

• Plain text menus (many languages available)

• Logically arranged menu structure

• Free assignment of transmitter controls, switches and servos

• Many pre-defi ned mixers, ready for use


Describing all the capabilities of this transmitter within a catalogue
is simply not possible. We have therefore decided to concentrate
on just a few of the many expansions and additional
features which make the PROFI mc 4000 one of the worldΆs
most powerful transmitters, and explain them in greater detail.

• Free assignment of transmitter controls and switches

- 12 proportional controls can be connected

- 12 switches can be connected

- standard equipment:

2 dual-axis sticks

2 proportional controls

2 three-position switches

4 two-position switches


• Free servo assignment

- 12 servos full-value channels equal speed (full transmission speed)


• Virtually unlimited mixer and adjustment facilities

- free mixers with two to eight inputs, can be cascaded

- for each mixer input there are:

3 to 13 curve points SLOW function: 0 to 25 seconds freely selectable switches (or permanently ON)


• Comprehensive timer functions

- 5 freely programmable timers per model

- lap timer with 99 lap time memories


• Ample model memory space

25 to 100 models, depending on complexity


• Flight modes

Up to fi ve fl ight modes per model, with variable transition (0.1 - 10 seconds).

• Plenty of help for “everyday fl ying”:

- Pre-programmed base types, ready for use with power models, gliders, helicopters, boats and cars

- Auto-trim trim settings are automatically stored when you switch flight modes

- Servo monitor simultaneously shows the servo travels on-screen for all functions

• Scanner with Channel-Check

The whole frequency band can be scanned and the results displayed on-screen in bar graph form.
To use Channel-Check (power-on guard) you first use the menu to select the channel to be checked.
If “your” channel is already in use, a warning appears on the screen, and the RF module remains switched off.

A few details of the PROFI mc 4000

• Twelve channels

All twelve channels are of equal value, equally fast and have the same resolution; there are no restrictions on channels 10

- 12. All the PROFI mc 4000Άs mixer and adjustment facilities can be applied in full to these channels. The transmitter is switchable to cope with 7-, 9- and 12-channel receivers,
which means that the transmitter can be used with all older MPX receivers as well as the latest types.


• Five flight modes

Five different flight modes are available for fixed-wing model aircraft and helicopters. A smooth transition can be set when switching from one to another; the period is variable
within the range 0 to 10 seconds.


• Fixed-wing model settings

The following prepared mixers are available:

• elevator and V-tail with compensation inputs

• flaperon, butterfly (crow), snap-flap, Quadro

• delta / flying wing

• Helicopter settings

The following functions are available:

• swashplate with mechanical mixers

• 3-point swashplate with 120° linkage

• 4-point swashplate with 90° linkage

• Heim system

• collective pitch curve

• virtual swashplate rotation

• flare

• tail rotor mixer (Revo-Mix)

• throttle curve with limiter and direct throttle

All curves can be set up using 3 - 13 points. Graphic screen displays make it easy to set curves correctly.

Contents:

1 PROFI mc 4000 transmitter with 6/3000 mAh NiMH battery

1 HFM3-SYNTH Synthesizer RF module

Specification – PROFI mc 4000

Transmission mode: FM/PPM, 10 kHz spacing

No. of channels: 12

Model memories: 25 – 100 (depending on model type)

Servo signal format: MULTIPLEX or UNI (switchable)

Power supply: 6 cells NiMH, sub-C size

Current drain: approx. 200/450 mA (excl. / incl. RF)

LCD backlight: approx. 200 mA additional current

Weight: approx. 1500 g (incl. battery)
Dimensions (L x W x H): 220 x 240 x 80 mm

Specification – PROFI CAR

Transmission mode PPM, 10 kHz spacing

with crystal RF module AM- oder FM

with Synthesizer RF module FM

Servo channels 3/4/5/7 according to type / model

Servo signal format MPX/UNI switchable

UNI 1,5 +/- 0,5 ms (100% servo travel)

MPX 1,6 +/- 0,55ms (100% servo travel)

Power supply 6 Zellen NiMH, Mignon (AA)

Current drain approx. 190 mA

Weight approx. 570 g (incl. battery)

Dimensions (L x W x Y) 185 x 120 x 195 mm