Modellsport Contact

ΚΑΤΗΓΟΡΙΕΣ

Κατασκευαστές

Στοιχεία Κατασκευαστή

Τηλεκατευθυνόμενα - RC

Τηλεκατευθυνόμενα Αυτοκίνητα - RC Cars Model Shop

Drones - Drone Shop

Traxxas rc cars

Τηλεκατευθυνόμενα σκάφη - rc boats

Τηλεκατευθυνόμενα Αυτοκίνητα - RC Cars

HPI Baja 5B V2 - 2.4GHz - 1/5 Scale RC Cars/Buggy RTR

  • Κωδικός/Model: 103860
  • Κατασκευάζεται από: HPI RACING

1,160.00€

Εξαντλήθηκε
The new giant 2WD HPI Baja 5B 1/5 RC Buggy with 2.4 GHz Radio System will take RC Cars to a new dimension!

The Baja 5B V2 is a rear wheel drive 1/5th scale off-road buggy that is nearly 32" in length! Its design is revolutionary for large scale RC Cars following the style of classic Baja buggies with long suspension arms for great ground clearance and large suspension travel. The big size allows the Baja 5B to go where smaller buggies can't and makes the Baja 5B's driving experience as close as you can get to the real thing.

The Baja 5B is big, but coming as a "Ready To Run" car, and powered by standard petrol it can't be easier to get ready for action. Everything is included in the kit - 1. Preassembled Baja 5B chassis, 2. Prepainted Baja body shell, 3. Preinstalled brand new HPI 2.4GHz radio system! This means you get to experience DSSS (Direct-Sequence Spread Spectrum) technology for no-crystal, no-fuss driving enjoyment. You can just switch on the radio and not have to worry about what channel anyone else is running - just get out and drive!, 6V receiverpack and charger. 4. Preinstalled massive 23cc petrol engine providing plenty of power. All you need to do is fill up with standard petrol and some oil, and off you go!

The innovative design of the Baja 5B has been developed and tested by HPI's designers over the last 18 months.

Baja 5B Specifications:


Chassis:
-
Over all Length 817mm
-Height: 255mm 1G (280mm with 0G)
-Width: Front 460mm / Rear 480mm
-Tyre Track: Front 395mm / Rear 400mm
-Wheelbase: 570mm
-Right height: 76mm
-Suspension travel: Front 95mm / Rear 100mm
-Weight: 9.6kg (21.3lb)
-Camber: adjustable front with shims rear with screw
-Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock)
-Toe-in: adjustable front with tie rod rear with shims 2 / 3* / 4 degree each side(* stock)
-Air craft aluminium 6061 T6 monocoque chassis
-Double wish bone suspension with adjustable roll center F/R
-Twin plate ventilated disk brake
-Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio)
-Diff: torque control viscous with 4 pinon gears sealed diff case with silicone oil
-Shock absorber: 5 adjustable dampening and fully adjustable coil over spring
-Wheel type: 3 pcs with high impact nylon material

Engine:
-
2 cycle piston valve gasoline engine
-Cooling system: air cooled
-Displacement: 23cc
-Maximum output: 2.4ps
-Fuel: pre-mixed fuel, 25 (Gasoline) : 1 (High grade 2 cycle engine oil)
-700cc capacity fuel tank
-Starter Recoil: starter

Radio:
-
HPI 2.4GHz radio system
-Steering servo: Hi torque water resistant 25kg.cm with Speed 0.16sec/60 degree
-Throttle servo: Hi torque water resistant 6kg.cm with Speed 0.16sec/60 degree
-Recovery battery: 6V rechargeable NiCad buttery


Designed & Hosted by Dynamic Promotion - www.4website.gr