TATTU Blheli_S Esc 30 Amp (2-5S, w/Dshot, No BEC) ESC for FPV RC model (1pcs).
TATTU ESC 30A 2-5S is designed for superior performance in FPV
Racing. Suppot regular 1-2ms pulse width input, as well as
Oneshot125(125-250us), Oneshot42 (41.7-83.3us) , Multshot(5-25us),
Dshot150, Dshot 300 and even Dshot600 and automatically detected by the
ESC
High quality N-FET, half-bridge drive and PCB specialized for cooling, only flashed with BLHeli_S firmware.
Specifications:
- Firmware: BLHeli_S V16.6 A-H-20
- Max continuous load: 30 amps
- Burst Current: 40A / 10sec
- Lipo Cells: 2 to 5 cells
- MCU: SILABS EFM8BB2 48MHz
- BEC: No
- Weight: 3.6g (board) 6.5g (total with wires and connectors)
- Dimensions
- PCB size: 26mm L*14.5mm W
- ESC height: 6mm
- Signal wire: 150mm
- Power wire: 100mm
| Max continuous load |
30 amps |
|---|
| Burst Current |
40A / 10sec |
| Lipo Cells |
2 to 5 cells |
| BEC |
No |
| ESC Weight |
3.6g (board) 6.5g (total with wires and connectors) |
| PCB size |
26mm L*14.5mm W |
| ESC heigh |
6mm |
| Signal wire |
150mm |
| Power wire |
100mm |
