ΤΗΛΕΚΑΤΕΥΘΥΝΣΗ DETRUM GAVIN-8C 8CH DIGITAL RADIO TX+RXC8 - DYNAM

Πρόσθεσε :

Τιμή: 149.00€

  • Κωδικός/Model: DTM-T007
  • Κατασκευαστής: Dynam
  • Διαθεσιμότητα : Model Shop, RC Models, Montelismos, Τηλεκατευθυνόμενα - Ετοιμοπαράδοτο / Παράδοση Αποστολής σε 1-3 μέρες.




ΤΗΛΕΚΑΤΕΥΘΥΝΣΗ DETRUM GAVIN-8C 8CH DIGITAL RADIO TX+RXC8 - DYNAM.

DYNAM DETRUM GAVIN-8C 8CH DIGITAL RADIO TX+RXC8

With the stability and reliability-supported technology that the Detrum GAVIN-8C transmitter offers, you can learn and grow in the hobby with the confidence and support you deserve.

GAVIN-8C 8-Channel Transmitter Features:

Wireless IC Adopting powerful wireless chips, extended with power amplifier (PA) and low noise amplifier (LNA), can maximize the system output power while reducing the system noise factor, thereby improving the signal coverage.

All-angle antenna The transmitter uses excellent linear all-band gain antenna, can greatly improve the transmitting efficiency, thereby enhancing the stability of the R/C system. The receiver adopts diversity antenna, combined with the signal detection and switching algorithm, the receiving signal is stable and reliable.

Suitable for various aircrafts It is suitable for airplanes, helicopters, multi-rotors and other aircrafts.

Fast response The response time is only 2.6ms, even 8 channels it acts synchronously.

Long distance remote control The R/C system adopts 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping spread spectrum (FHSS) technologies, has high receiving sensitivity and strong anti-interference capability, can support a stable remote control for more than 1,000 meters on the ground and more than 1,600 meters in the air.

LCD 192x96 high-resolution dot-matrix LCD screen, providing with easy to understand menu, it is very simple to use.

Unique ID code Each transmitter has an individually assigned, unique ID code. Once the binding is made, the ID code is stored in the receiver and no further binding is necessary after restarting the receiver. When the receiver is working, it will verify whether the ID code of the transmitter is being paired, to enhance the stability of the R/C system.

Fail safe function If the aircraft flies out of the remote control range and cannot receive a valid RF signal from the transmitter, the receiver’s outputs can be driven to their preset failsafe positions.

High section precision By using the 4096 section precision sticks, you can experience a smooth and exquisite flight operation.

Low voltage alarm Detecting the input voltage of the transmitter in real time, it will alarm in advance when it is low battery voltage. This will bring greater security for flight operation.

USB Upgrade Upgrade by a USB cable helps GAVIN-8C always keeps the latest program.

Setting the programmable items of flight controller for airplane When working with SR86A sport receiver which is integrated with 6-axis gyro, GAVIN-8C can be used to set its programmable items in real time. For example, roll/pitch/yaw gain, flight mode, wing type, etc. Then you can set the programmable items for SR86A conveniently.

Detrum SRXC8 Receiver Features:

Main Control IC
Using ARM M3 processor, provides strong resolution capability.

High Sensitivity
Adopting 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping spread spectrum (FHSS) technology, the receiver has high sensitivity and strong anti-interference capability.

Diversity Antenna
By using diversity antenna, can automatically switch the signals to ensure the stability of the received signal.

Unique ID Code
Each transmitter has an individually assigned, unique ID code. Once the binding is made, the ID code is stored in the receiver and no further binding is necessary after restarting the receiver.

Fail Safe
When the aircraft flies out of range, the receiver cannot receive a valid RF signal from the transmitter, and will move the servos to predefined position.

Output Signals
Support PPM and PWM signals.

Spec Check:

  • Dimension: 27.5x42x16mm
  • Weight: 11.8g
  • Frequency: 2.4GHz
  • Communication Distance: >1.6Km
  • Power Supply: 3.6V~16V
  • Output Signal: PWM or PPM




Designed & Hosted by Dynamic Promotion - www.4website.gr
E-Shop for RC Models