This all-molded foam airplane comes completely painted in an attractive
matte finish with waterslide decals applied. The 70mm fan with
brushless outrunner motor is pre-installed, as is the 45A brushless
speed control. The jet has 5 pre-installed servos: (2) ailerons, (2)
elevators, nose wheel steering. Landing gear is fixed but can be easily
removed for hand launching. Battery changes are quick, just remove the
canopy that is held in place with magnets.
The jet is large enough for good visibility in flight, but is easily
transported. The thrust from the 70mm fan with the included 4 cell 2100
mAh LiPo battery will quickly accelerate the F-4 into the air. The
climbout is steep and the speed impressive. The full scale Phantom had
the glide angle of a brick; our version displays much more pilot
friendly manners. Due to its light weight the F-4 will slow down nicely
and retain its good flying character, making landings a thing of beauty.
Flight times are about 5 minutes on a charge. Requires a 4 channel
radio.
Kit Includes
- 5 pre-installed servos
- 45 Amp brushless motor controller
- Outrunner brushless motor
- 4 Cell 20c 2100 mAh LiPo battery
- 70mm ducted fan
Spec Check
- Wingspan: 720mm
- Length:1100mm
- Flying Weight: 850g
Requires TX/RX for completion.