Turnigy Mega 300w 8s Balance Charger/Discharger (150w x 2).
Tired of carrying two chargers to the field? Need serious charging power without the hassle of multiple chargers? Then the Turnigy Mega 300w is the charger you have been waiting for!
This charger features 2 independent 150w chargers inside a single case, thatΆs a total of 300watts charging power! The Mega 300w is capable of charging 8s Lipo packs at 5.1Amps or 27 Nixx cells at 4.6Amps. Each output is independent and although this charger features universal balance ports; a JST-XH balance board has been included for balancing Li-XX batteries. It even features optional temperature sensing ports (sensors sold separately) which will monitor the battery temp during the charge process – great for getting the most out of Ni-XX cells.
The Turnigy MEGA 300w alloy case has cooling holes on top and dual temperature controlled fans to keep the internal temps low. This is a well thought out dual charger at a great price!
Note: You will need a power supply exceeding 30Amps for bench top use!
Features:
• Dual power output 150Wx2 (300W total)
• Supports Li-XX, Ni-XX and PB batteries
• Store up to 10 battery settings
• Large cooling holes on the top edge of the case
• Dual temperature controlled cooling fans
• Wide input voltage range (11~18VDC)
Specs:
Charging Output: 2 x 150W (300w Total)
Input Voltage: 11~18v DC
Charge Current Range: 0.1~7.0A
Discharge Current: 0.1~5.0A
Discharge Power: 2x50watt
Balance Current Drain: 200mAh/cell
Li-XX Cell Count: 1~8s
Ni-XX Cell Count: 1~27cells
Pb Battery Voltage: 2~36v
Battery Setup Memories: 10
Intelligent Temp Control: Yes
Cooling: Dual Fan
Weight: 903g
Dimension: 188x136x58.5mm
Includes:
1 x JST-XH balance board
1 x Alligator clip charge lead
1 x Tamiya style charge lead
1 x Jr/Futaba Rx charge lead
1 x 4mm bullet connector pig tails (fit your own connectors)
1 x Power input alligator clip pair
